Montana State Library 20150707 vector digital data Montana State Library https://ftpgeoinfo.msl.mt.gov/Data/Spatial/MSDI/Cadastral/CadastralHistoric/CadNSDI_MT_20150707_StatePlane.zip https://mslservices.mt.gov/Geographic_Information/Data/DataList/datalist_Details.aspx?did={9025D5DE-05C1-406F-A8B4-6A3E39EF3B8D} These data depict the Public Land Survey System (PLSS) for the state of Montana and are based on Geographic Coordinate Data Base (GCDB) coordinate data. GCDB is the authoritative source for PLSS data. These data are represented in the following feature classes: PLSSTownship is a polygon feature class representing PLSS Townships; PLSSFirstDivision is a polygon feature class representing PLSS Sections; PLSSSecondDivision is a polygon feature class representing PLSS Quarter Quarter Sections; PLSSPoints is a point feature class representing PLSS Corner Points; PLSSSpecialSurvey is a polygon feature class representing special survey areas, which include include but are not limited to, homestead entry surveys, mineral surveys, metes and bounds surveys, and town site surveys; PLSSHistoricSpecialSurvey is a polygon feature class representing historic special survey areas; PLSSHistoricSecondDivision is a polygon feature class representing historic PLSS Quarter Quarter Sections; Conflicted Areas is a polygon feature class representing known areas of gaps or overlaps between Townships or state boundaries;and PLSSMeanderedWater is a polygon feature class representing meandered water polygons, most commonly riparian areas and lakes, present during the original survey for the state. This data set was created to provide continuous cadastre data for the state of Montana. The CADNSDI or the Cadastral Publication Data Standard is the cadastral data component of the NSDI. This is the publication guideline for cadastral data that is intended to provide a common format and structure and content for cadastral information that can be made available across jurisdictional boundaries, providing a consistent and uniform cadastral data to meet business need that includes connections to the source information from the data stewards. The data stewards determine which data are published and should be contacted for any questions on data content or for additional information. The cadastral publication data is data provided by cadastral data producers in a standard form on a regular basis. Cadastral publication data has two primary components, land parcel data and cadastral reference data. It is important to recognize that the publication data are not the same as the operation and maintenance or production data. The production data is structured to optimize maintenance processes, is integrated with internal agency operations and contains much more detail than the publication data. The publication data is a subset of the more complete production data and is reformatted to meet a national standard so data can be integrated across jurisdictional boundaries and be presented in a consistent and standard form nationally. 20150707 Publication Date Complete As needed -116.161717 -103.501873 49.20934 44.166676 ISO 19115 Topic Category boundaries location planningCadastre None LIS Geographic Coordinate Data Base GCDB Range Bureau of Land Management NSDI MSDI Land Information System PLSS Cadastral Public Land Survey System General Land Office Special Survey Township Framework National Spatial Data Infrastructure GLO NILS Quarter Section BLM National Integrated Land System Section Montana Spatial Data Infrastructure U.S. Department of Commerce, 1977, Countries, Dependencies, Areas of Special Sovereignty, and Their Principal Administrative Divisions (Federal Information Processing Standard (FIPS) 10-3): Washington, DC, National Institute of Standards and Technology. Montana United States U.S. Department of Commerce, 1987, Codes for the Identification of the States, the District of Columbia and the Outlying Areas of the United States, and Associated Areas (FIPS 5-2): Washington, DC, National Institute of Standards and Technology. USA None The Montana State Library Geographic Information Services provides this product/service for informational purposes only. The Library did not produce it for, nor is it suitable for legal, engineering, or surveying purposes. Consumers of this information should review or consult the primary data and information sources to ascertain the viability of the information for their purposes. The Library provides these data in good faith but does not represent or warrant its accuracy, adequacy, or completeness. In no event shall the Library be liable for any incorrect results or analysis; any direct, indirect, special, or consequential damages to any party; or any lost profits arising out of or in connection with the use or the inability to use the data or the services provided. The Library makes these data and services available as a convenience to the public, and for no other purpose. The Library reserves the right to change or revise published data and/or services at any time. Montana State Library mailing

PO Box 201800

Helena MT 59620-1800 US 406-444-5354 Montana Relay 711 406-444-0266 geoinfo@mt.gov FGDC Cadastral Subcommittee, BLM Cadastral Survey Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; ESRI ArcCatalog 9.2.6.1500 PLSS data for the state of Montana was loaded into polygon and point feature classes with standardized attributes. 20140701 A combination of survey grade GPS and air photo interpreted control points were obtained for 25 townships in Teton County and 11 townships in Yellowstone County. The townships were adjusted to match the control points. The townships adjusted in Teton County were in Townships 21 North through 25 North and Range 4 West through Range 1 East. The townships adjusted in Yellowstone County were Ranges 23 and 24 East in Townships 1 North through 4 North, Range 28 East in Townships 2 North and 3 North, and Township 3 North, Range 29 East. 20150107 A combination of survey grade GPS and air photo interpreted control points were obtained for 55 townships on the Fort Belknap Reservation and 104 townships on the Crow Reservation. The townships were adjusted to match the control points. The townships adjusted on the Fort Belknap Reservation were in Townships 24 North through 32 North and Range 20 East through Range 28 East. The townships adjusted on the Crow Reservation were in Townships 9 South through 6N and Ranges 26 East through 38 East. 20150107 A combination of survey grade GPS and air photo interpreted control points were obtained for 55 townships on the Fort Belknap Reservation and 104 townships on the Crow Reservation. The townships were adjusted to match the control points. The townships adjusted on the Fort Belknap Reservation were in Townships 24 North through 32 North and Range 20 East through Range 28 East. The townships adjusted on the Crow Reservation were in Townships 9 South through 6N and Ranges 26 East through 38 East. 20150414 A combination of survey grade GPS and air photo interpreted control points were obtained for 21 townships in Park County and 43 townships in Gallatin County. The townships were adjusted to match the control points. The townships adjusted in Park County were in Townships 3 South through 5 North and Ranges 7 East through Range 11 East. The townships adjusted in Gallatin County were in Townships 4 South through 5 North and Ranges 1 West through 6 East. 20150707 Vector GT-polygon composed of chains 4238 Montana State Library mailing

PO Box 201800

Helena MT 59620-1800 US 406-444-5354 Montana Relay 711 406-444-0266 geoinfo@mt.gov Downloadable Data The Montana State Library Geographic Information Services provides this product/service for informational purposes only. The Library did not produce it for, nor is it suitable for legal, engineering, or surveying purposes. Consumers of this information should review or consult the primary data and information sources to ascertain the viability of the information for their purposes. The Library provides these data in good faith but does not represent or warrant its accuracy, adequacy, or completeness. In no event shall the Library be liable for any incorrect results or analysis; any direct, indirect, special, or consequential damages to any party; or any lost profits arising out of or in connection with the use or the inability to use the data or the services provided. The Library makes these data and services available as a convenience to the public, and for no other purpose. The Library reserves the right to change or revise published data and/or services at any time. 20150707 Montana State Library mailing and physical

Montana State Library

P.O. Box 201800

Helena Montana 59620 406-444-5354 Montana Relay 711 406-444-0266 geoinfo@mt.gov FGDC Content Standard for Digital Geospatial Metadata FGDC-STD-001-1998 local time {91de9558-b05e-428e-8dae-a5ab86046d9f}